Network Data Encryption Modules; Power Supplies - H3C SecPath F100-X-G3 Installation Manual

Figure1-16 Front panel of the NS-NIM-TG6A interface module
(1) 10GBASE-R fiber ports
(3) Ejector lever

Network data encryption modules

CAUTION:
The network data encryption modules are not hot swappable.
The appearance of network data encryption modules varies by models. For more information, see
H3C SecPath Firewall Network Data Encryption Module Guide.
Table1-2 describes the hardware and software compatibility with the network data encryption
modules.
Table1-2 Hardware and software compatibility with the network data encryption modules
Network data
encryption
module
NSQM1F1KGM0
NSQM1F1KGMB
NSQM1F1KGMC

Power supplies

The F1000-C-G3, F1000-S-G3, F1000-A-G3, and F1000-E-G3 firewalls each comes with power
supply slot PWR0 installed with a filler panel and power supply slot PWR1 empty. They support both
AC and DC power supplies. No power supplies are provided with the firewalls. Prepare power
supplies for the firewalls yourself as required.
1
Applicable firewalls
F100-A-G3, F100-E-G3
F1000-C-G3
F1000-S-G3, F1000-A-G3,
F1000-E-G3
F100-A-G3, F100-E-G3
F1000-C-G3
F1000-S-G3, F1000-A-G3,
F1000-E-G3
F100-A-G3, F100-E-G3
F1000-C-G3
F1000-S-G3, F1000-A-G3,
F1000-E-G3
2
3
(2) Captive screw
Applicable
slots
Slot 1
Slots 1 to 3
Slots 1 and 2
Slots 1 to 4
Slots 1 and 2
Slots 1 to 4
8
Applicable software
versions
R9323 and later
E8601P07 and later
E8601P07 and later
E9345 and later
E8601P07 and later
E8601P07 and later
E9345 and later
E8601P07 and later
E8601P07 and later