Input Monitor; Figure 6-6: Input Monitor Tab - evertz 2430RX-J2K-IP Series User Manual

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
6.5.

INPUT MONITOR

Figure 6-6: Input Monitor Tab

Stream Type: This parameter will display whether or not the current input stream is multicast or
unicast.
Received Ethernet Bandwidth: This parameter displays the Ethernet bandwidth for the input stream,
and can range from 0 to 1000000000 bits.
Received IP Packets: This parameter displays the amount of IP packets that have been received on
the input stream. Range for this value can be from 0 to 2147483647.
Received Transport Stream (TS) Packets: This parameter displays the amount of TS packets that
have been received on the input stream. Range for this value can be from 0 to 2147483647.
Protocol Status: This parameter will verify if the stream is running on RTP, and if it is not the following
values will be displayed: UDPor Unknown.
TS Packet Per IP Packet: This parameter displays how many TS packets are contained within each
IP Packet/Ethernet frame. Range for this value can be from 1 to 7.
TS Packet Size: This parameter diplays the current TS packet size in bytes. The packet size will be
either 188 bytes or 204 bytes.
Input State: This parameter will display whether or not the card is currently receiving anything on the
input. The input stat of the card will be either Active or Inactive.
Page - 25
Revision 0.1