Table of Contents
Advertisement
Input IP Address: This parameter allows the user to define the IP address/ Multicast address from
which data will be received.
Input IP Port Number: This parameter allows the user to select the input UDP port number, which can
range from 1 to 65535.
Program Tuning Mode: This parameter allows the user to select the program Tuning mode of the
decoder. The user can select from two options:
•
AutoPidSelect: automatically choose the PIDs for each audio stream, based on Auto Program
Select Mode.
•
ManualPidSelect: Manually select PIDs for each audio stream.
Auto Program Select Mode: This control allows the user to set how the decoder will select a program
for decoding when Program Tuning Mode is set to auto.
•
First Program in PAT: select audio PIDs from first program will be chosen.
•
Lowest Program Num: select audio PIDs from lowest program will be used.
•
Specific Program Select: will pick audio PIDs from specific program, specified by Program
Number Select control, for decoding.
Program Number Select: This parameter allows the user to select the program which will be decoded.
This control is applicable only when the Program Tuning Mode is set to Auto PID Select, value for
this range can be set from 0 to 65535.
Video PID Select: This parameter allows the user to select the Video PID that will be decoded. This
control is only applicable when the Program Tuning Mode is set to Manual PID Select. Range for
these values can be set from 2 to 8190.
Note: 0, 1 and 8191 are reserved PID's in MPEG, so these values are not
included.
Audio PID Select: This parameter allows the user to select the Audio PID which will be decoded. This
control is only applicable when the Program Tuning Mode is set to Auto/Manual PID Select. Range for
these values can be set from 2 to 8190.
Note: 0, 1 and 8191 are reserved PID's in MPEG, so these values are not
included.
PCR PID Select: This parameter allows the user to select the PCR PID the decoder will use this PID
for PCR clock reference. This control is only applicable when the Program Tuning Mode is set to
Auto/Manual PID Select. Range for these values can be set from 2 to 8190.
Note: 0, 1 and 8191 are reserved PID's in MPEG, so these values are not
included.
JPEG2000 to HDMI Converter User Manual
Revision 0.1
2430RX-J2K-IP
Page - 21
Advertisement
Table of Contents
