Miscellaneous Issues - Postek iQ200 User Manual

iQ200 User's Manual
Indication Possible Cause
The printer is in a
paused state
Cutter error
Only [READY]
indicator blinks

5.2 Miscellaneous Issues

Table 5-2 identifies miscellaneous issues with the printer, the possible causes, and the recommended
solutions.
Problem
Printhead is dirty.
Vertical Blank
Lines Appear
The driver is incorrect.
Data Sent but
Not Printing
Memory overflow
The printing parameters are
set inappropriately.
Poor Printing
Printhead is dirty.
Quality
Poor quality consumables
For errors not listed here, please contact an authorized POSTEK Service Provider for further
assistance.
Press the [PAUSE/Self Test]
button to resume.
Please check whether the cutter is
installed correctly, for details,
please contact an authorized
POSTEK service provider for
technical support.
Table 5-2 Miscellaneous Printer Issues
Possible Cause
Solutions
Recommended Solution
Clean the Printhead. Follow the recommended
maintenance guidelines for cleaning the
Printhead.
Ensure the correct driver is chosen in the label
software.
Reset the printer.
• Adjust print darkness setting value.
• Adjust print speed setting value.
Clean the Printhead. Follow the recommended
maintenance guidelines for cleaning the
Printhead.
Change to higher-quality consumables.
Chapter 5: Troubleshooting
Important Notice
31