Raven VSN Installation Manual page 14

CHAPTER 3
ANGLE
• 45°±1°
• Measured with the machine level, in relation to the camera lens and the ground
FIGURE 3. Mounting Angle Diagram
VIEW
• A clear unobstructed view is required
• This can be verified by connecting the video cable to the Viper® 4/4+/CR12. Or on the optional analog display
kit (117-2020-007) for CR7™.
FIGURE 4. Field of View Example
MOUNTING HARDWARE
Mount to a sturdy bracket:
• VSN® weight: 8.6 pounds (3.9 Kg)
• Excess movement of the VSN may result in poor steering performance
• No more than ±1/16" (1.6mm) of camera movement, in any direction, throughout full engine RPM range
• Ensure to account for the 23-pin connector and cable in the bracket design
10 VSN® Installation Manual for Case AFS Connect Steiger and New Holland PLM T9 (MY 2021 and Newer)