Cleaning Your Robot; Everyday Cleaning; Additional Cleaning - Universal Robots e Series Installation Manual

4. Cleaning your robot

4.1. Everyday cleaning

You can wipe away any dust/dirt/oil observed on the robot arm and/or Teach Pendant using a cloth
and one of the following cleaning agents: Water, Isopropyl alcohol, 10% Ethanol alcohol or 10%
Naphtha. In rare cases, very small amounts of grease can be visible from the joint. This does not
affect the function, use, or lifetime of the joint.

4.2. Additional cleaning

Due to the added focus on cleaning your robot, Universal Robots recommends cleaning with 70%
isopropyl alcohol (rubbing alcohol).
1. Wipe the robot with a hard twisted micro fiber cloth and 70% isopropyl alcohol (rubbing
alcohol).
2. Let the 70% isopropyl alcohol dwell on the robot for 5 minutes, and then clean the robot using
standard cleaning procedure.
DO NOT USE BLEACH. Do not use bleach in any diluted cleaning solution.
e-Series Injection Molding Machine
Interface (IMMI)
10
4. Cleaning your robot
Installation Guide