Pro Device; Permitted Mounting Positions; Installing The Built-In Unit; Installation Guidelines - Siemens SIMATIC IPC477D Operating Instructions Manual

3.1.4

PRO device

3.1.4.1

Permitted mounting positions

Mounting position
The mounting positions described below are permitted for the PRO device.
● Standard mounting position: Vertical installation in horizontal format
● Inclined installation in horizontal format with a vertical inclination of maximum ±45°
Upright mounting in vertical format is prohibited for the PRO device
①
②
3.2

Installing the built-in unit

3.2.1

Installation guidelines

Danger, high voltage
A high voltage may be present in the control cabinet and could cause a dangerous electric
shock.
It may result in death or serious physical injury.
Isolate the power supply to the control cabinet before opening it. Ensure that the power to
the control cabinet cannot be turned on accidentally.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
Mounting position Deviation from the vertical
Inclined ≤ 45°
Vertical 0°
WARNING
Mounting and connecting the device
3.2 Installing the built-in unit
43