Installing The Software; Reinstalling The Operating System; General Installation Procedure - Siemens SIMATIC IPC477D Operating Instructions Manual

Installation
Note
Do not exceed the maximum permissible torques
If you tighten the screws with too much torque, the threading in enclosure and drive cage
may be damaged. Note the maximum permitted torques:
0.8 Nm for the following connections:
• M3 x 5 pan-head screws for mounting the drive cage in the backplane cover
0.5 Nm for the following connections:
• M3 x 5 countersunk screws for mounting the SSD drive in the drive cage
Proceed in reverse order for the installation.
1. In step 1 above, ensure that the connectors are not installed with reverse polarity.
2. Close the device.
7.5

Installing the software

7.5.1

Reinstalling the operating system

7.5.1.1

General installation procedure

If your operating system is no longer functioning correctly, you can reinstall it in one of two
ways:
● With the Recovery DVD and "Documentation and Drivers" CD/DVD (only with
Windows 7 Ultimate)
● With the Restore DVD
Recovery DVD (only with Windows 7 Ultimate)
NOTICE
Windows Embedded
The Recovery DVD is not available for Windows Embedded operating systems.
The Recovery DVD contains the installation program with tools for configuring the drives and
installing the operating system and the supported languages (MUI package).
The basic language of the installed operating system is English. To add other languages,
install these languages from the Recovery DVD at a later time.
"Documentation and Drivers" CD/DVD
The "Documentation and Drivers" CD/DVD contains the documentation and the hardware
drivers.
Restore DVD
The Restore DVD is included in the product package when you have ordered a device with
operating system. The DVD contains an image file with the original software package:
Operating system with installed hardware drivers and monitoring software, e.g. DiagBase.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
Maintaining and servicing your device
7.5 Installing the software
121