Exit Menu - Siemens SIMATIC IPC477D Operating Instructions Manual

Technical information
8.6 BIOS description
The following table shows the standard menus. Not all menus are included in each supplied
device configuration.
Menu
Main
Advanced
Security
Power
Boot
Exit
8.6.4

Exit menu

You always exit BIOS Setup in this menu.
Exit Saving Changes
Save Change Without
Exit
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
See also
SIMATIC IPC after-sales information system (http://www.siemens.com/asis)
176
Meaning
Display system information, for example, BIOS version, processor and memory
Configure hardware using different submenus
Security functions, e.g., setting a password
Specify CPU settings and switch-on functions.
Determine boot options, e.g., boot order
Save and exit (see Exit menu)
All changes are saved and the system is restarted with the new Setup
parameters.
All changes are saved
All changes are discarded and the system is restarted with the old Setup
parameters.
All setup parameters are reset to the safe default values.
Notice: The existing Setup parameters are overwritten by this.
The profile must be loaded with the custom Setup parameters.
Requirement: The parameters are saved prior to this with "Save Custom
Defaults".
The currently configured Setup parameters are saved as a custom profile
(see also "Load Custom Defaults").
All changes are discarded.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD