Siemens SIMATIC IPC477D Operating Instructions Manual page 179

Advanced > Active Management Technology Support
System parameters
Intel AMT Support
Intel AMT Setup Prompt
MEBx Selection Screen
Un-Configure ME
Intel AMT Password Write
AMT CIRA Request Trig
USB Configure
Intel AMT SPI Protected
Advanced > PCIe Slot Configuration
System parameters
Slot0 - GenX
Slot1 - GenX
Slot2 - GenX
Security
System parameters
Power-on Password
User Access Level
TPM Operation
TPM Force Clear
Visible depending on the ordered device configuration
1
Power
System parameters
Wake on LAN
PROFINET port is On
PROFINET Wake Capability
USB Ports 0/1 Wake Capability
USB Ports 2/3 Wake Capability
USB Port Internal Wake Capability
USB Port Front Wake Capability
USB Ports Touch Wake Capability
Visible depending on the ordered device configuration
1
Only visible if the parameter "PROFINET port is On" is enabled.
2
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
1
1
1
1 2
Default settings
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Default settings
Gen1
Gen1
Gen1
Default settings
Disabled
Full
No Operation
Disabled
Default settings
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Technical information
8.6 BIOS description
Local settings
Local settings
Local settings
Local settings
179