Expanding the device and assigning device parameters
6.5 Installing and removing a DVD drive (built-in unit only)
Installation
1. Remove the marked screws and take off
the rear panel of the enclosure.
2. Remove the marked screw and pull out
the connector in the direction of the ar-
row.
3. Remove the marked screws.
Also remove the third screw on the oppo-
site side. Lift the DVD drive off the base
plate.
Removal
Follow the steps for installation in reverse order.
104
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD