Detaching And Re-Attaching The Battery Pack - Nikon DTM-302 Series Instruction Manual

Discharging the battery pack
Connect the power plug on the charger to an AC power outlet.
1.
Connect the charging plug on the charger cable to the charging connector on the
2.
battery pack.
Press the DISCHARGE button on the battery charger.
3.
The DISCHARGE indicator lights up, and the charger starts to discharge the
battery. When discharging is completed, the DISCHARGE indicator turns off.
Then the CHARGE indicator lights up, and charging starts automatically.
To stop discharging the battery pack, press the DISCHARGE button again.
Note – The battery pack can be recharged repeatedly. If you recharge the battery
pack while it still has enough power to operate the instrument, however, it will last
for a shorter period. This is called the memory effect. If you experience the memory
effect, discharge the battery pack as described above and then recharge it. This
returns the battery pack to its full capacity. We recommend that you discharge the
battery pack in this way at least once every ten charges.

Detaching and Re-Attaching the Battery Pack

Detaching the BC-65 battery pack
If the instrument is turned on, press
1.
Depress the battery mounting button while holding the battery pack.
2.
C
Caution – Avoid touching the contacts on the battery pack.
[PWR] to turn it off.
Total Station DTM-302 Series Instruction Manual 13
Preparation 2
2.1