Measuring Distances; Sighting A Prism Reflector - Nikon DTM-302 Series Instruction Manual

Jobs created before version 1.10
The current database version is 1.10. Jobs prefixed
with ? were created in earlier versions of the
database, and cannot be used in version 1.10.
If a job is from an earlier version, you cannot open
it, set it as the control job, or display its job
information. However, you can use the
softkey to delete it.
Jobs created in version 1.02 or earlier are not compatible with version 1.10 or later.
Download all jobs before you update the software that is running on the instrument.

Measuring Distances

Sighting a prism reflector

C
Warning – Never look at the sun through the telescope. If you do, you may
damage or lose your eyesight.
For information on how to assemble the prism reflector, see Setting Up the Prism
Reflector, page 18.
Sight the telescope to see crosshairs at the center of the
prism reflector.
DEL
Total Station DTM-302 Series Instruction Manual 51
Getting Started 3
Sighting a single prism
3.1
31.1