Station Setup - Nikon DTM-302 Series Instruction Manual

10 Error Messages
NO Stn Setup
You did not perform a station setup or BS check before entering the Stakeout
function.
To...
go to the Stn Setup menu
return to the Basic
Measurement Screen (BMS)
go to the Stakeout menu
C
Caution – Selecting
should only use the
coordinates and the current HA orientation are correct. Otherwise, records in
the Stakeout function may not be correct.

Station Setup

Calc ST Failed Need additional PT
Calculating ST failed in resection. This message may appear after you have deleted
a point the View shots screen.
Press any key to return to the PT input screen. Take another shot to calculate the ST
coordinate.
Same Coordinate
The input PT or coordinate is identical to the current station in STN/1:Known, or
the same coordinate or point name/number is found in Resection.
Press any key to return to the PT input screen. Then use a different PT.
202 Total Station DTM-302 Series Instruction Manual
Press ...
[2] or select
[ESC]
[1] or select
Continue
does not resume the last ST record. You
Continue
option if you are sure that the previous ST
Stn Setup
Continue
1010.2
10.11
1011.1
1011.2