1Sec-Keys; [Msr] [Dsp] [Usr] [S-O]; [Msr] Key Settings - Nikon DTM-302 Series Instruction Manual

5 Menu Key
Code
To upload a code list, press [4] or select
List
.
Connect the RS-232C cable.
Start a terminal program on the computer.
To put the instrument into receive mode, press
OK
[ENT] or the softkey.
The counter is updated as each line in the list is
stored.
You can store up to 254 codes or point names.
If a code or point name is longer than 16 characters, it is truncated.

1sec-Keys

5.1
Use the 1sec-Keys menu to configure the settings
for the one-second keys, [MSR] , [DSP] , [USR] , [S-O] ,
and [DAT] . To access this menu, press [6] or select
1sec-Keys
in the MENU screen.

[MSR] key settings

51.1
To change settings for the [MSR1] and [MSR2] keys,
[MSR]
press [1] or select in the 1sec-Keys menu.
154 Total Station DTM-302 Series Instruction Manual