Searching Records - Nikon DTM-302 Series Instruction Manual

5 Menu Key
Editing station records
Note – The system will not recalculate measurements if you change the station
record. All coordinate and raw data observed from an edited station record must be
recalculated in your postprocessing software.
In the RAW screen, use
station record that you want to edit. Then press the
Edit
softkey.
You can edit any field in the ST record, but the
instrument does not recalculate any measurements
from this station.
Press in the AZ field to confirm the change.
[ENT]
If you change the ST or HI values, the coordinates of observation points are not
recalculated. A comment record is stored to record the change. The following
example shows a comment record for a changed HI value:
CO,HI changed at ST:9012 Old HI= 1.345m
If you change the BS or AZ values, raw records are not recalculated. A comment
record is stored to record the change.

Searching records

You can search for records by their type, point name, code, or by any combination
of these values.
Searching raw records
In the RAW screen, press the
access the raw data search function.
142 Total Station DTM-302 Series Instruction Manual
[^] or [v] to highlight the
Srch
softkey to
50.1