Two-Point Resection Along A Known Line - Nikon DTM-302 Series Instruction Manual

Two-point resection along a known line

To enter the Known Line function, press
1.
Known Line
select
Enter a known point as P1.
2.
If you enter a new point name, a coordinate
input screen appears.
Sight P1 and press
measurement. Press
Choose how you want to define a known line:
3.
– To define the line by entering P2
coordinates, press
– To define the line by entering the azimuth,
press [2] or select
By Angle
If you select
4.
screen appears. Enter the angle value and press
[ENT] .
A measurement screen appears.
Sight P2 and press
5.
measurement. Press
in the Stn Setup menu.
[MSR1] or [MSR2] to take a
[ENT] .
By Coord
[1] or select
By Angle
.
, the azimuth input
[MSR1] or [MSR2] to take a
[ENT] .
Total Station DTM-302 Series Instruction Manual 71
[7] or
.
Applications 4
40.1