[Mode] Key - Nikon DTM-302 Series Instruction Manual

Header characters
The following header characters can be used in DSP screens:
A colon (:) indicates that tilt correction is applied
to the value.
A hash symbol (#) indicates that tilt correction is
off.
An underscore (_) under the tilt correction
character indicates that Sea Level Correction or
Scale factor is applied.

[MODE] key

Use the [MODE] key to change the keyboard mode for the current screen.
Changing input mode while entering points or codes
When the cursor is in a point (PT) or code (CD)
field, press [MODE]
between alphanumeric (
The input mode indicator in the status bar changes
to show the current input mode.
When the cursor is in a height (HT) field, only numeric input mode is available.
Pressing [MODE] has no effect when the cursor is in a HT field.
to change the input mode
A
) and numeric (
Total Station DTM-302 Series Instruction Manual 33
1
).
Getting Started 3
30.1