Getting Started 3
[COD] key
30.1
In the BMS, press
[COD]
to change the default feature code that will appear in the CD
field when you record a point.
Setting the default code
When you press
[COD]
in the BMS, a window for
entering the feature code appears.
List
Stack
You can use the
and
softkeys to
enter the code.
Qcode observations
To enter the Quick code observation routine, press
Qcode
the
softkey.
In this function, you can use the ten numeric keys
to both select a feature code and shoot a point.
To change the measurement mode for the Quick
Sett
code observation, press the
softkey.
In Quick code measurement, the Rec mode can only be set to Confirm or ALL.
Total Station DTM-302 Series Instruction Manual 35