Related Manuals for Nikon DS-U2
Summary of Contents for Nikon DS-U2
- Page 1 M381E 07.12.NF.5 *M381EN05* DS Camera Control Unit DS-U2 DS Camera Head DS-Fi1/DS-5M/DS-2Mv/DS-2MBW DS Cooled Camera Head DS-Qi1Mc/DS-5Mc/DS-2MBWc/DS-Ri1 <Instructions> (Ver.4.0)
- Page 3 Thank you for purchasing the Nikon products. This instruction manual has been prepared for users of the DS Camera Control Unit DS-U2, DS Camera Head DS-Fi1/DS-5M/DS-2Mv/DS-2MBW, DS Cooled Camera Head DS-Qi1Mc/DS-5Mc/DS-2MBWc/DS-Ri1. To ensure correct use, please read this manual carefully before use.
- Page 4 To prevent fire or burn injury due to the breakage of a cable, do not excessively bend nor twist the cables. • To prevent fire due to heating, do not place a cloth or paper on the DS-U2 nor block the vent of the DS-U2. - ii -...
- Page 5 2. Turn off the power before assembling the product or connecting /disconnecting cables. To prevent failure or malfunction, be sure to turn off the power switch of the DS-U2 before assembling the product or connecting/disconnecting a cable.
-
Page 6: Table Of Contents
2 Components .......................... 2 Chapter 2 Peripheral Equipment........................3 Chapter 3 Names of Parts and Their Functions................... 5 1 DS Camera Control Unit DS-U2 .................... 5 2 DS Camera Head ........................7 Chapter 4 Connecting and Installing the Equipment..................8 1 Connection Diagrams...................... -
Page 7: Chapter 1 Before Use
Chapter 1 Before Use Models of the DS Camera Head Before Use Models of the DS Camera Head Eight models of DS camera head are provided as follows. The features differ depending on the type you have purchased. Check the type name indicated on the DS camera head before use. Model name is indicated on the tripod mount or a place near the camera cap attachment location. -
Page 8: Components
Before Use Components Components Check to see that all the items listed below are provided in the package. If any items are missing, contact your nearest Nikon representative immediately. DS Camera Control Unit DS-U2 Power cord Vertical stand Camera cable 3 m E229586... -
Page 9: Chapter 2 Peripheral Equipment
Peripheral Equipment Peripheral Equipment (1) Personal computer (PC) The DS-U2 is connected to a PC via a USB2.0 interface. The DS-U2 can perform the following operations via the NIS-Elements freeware on the PC. Display the captured images on the PC monitor... - Page 10 Chapter 2 Peripheral Equipment (2) USB cable A USB cable is used to connect the DS-U2 to the PC. We recommend a USB 2.0-compatible AB-type cable. (3) C mount lens A C mount lens is required to photograph subjects other than photomicrographs. Any lens that meets the following conditions may be used: •...
-
Page 11: Chapter 3 Names Of Parts And Their Functions
Chapter 3 Names of Parts and Their Functions DS Camera Control Unit DS-U2 Names of Parts and Their Functions DS Camera Control Unit DS-U2 External appearance of the DS-U2 Ventilation hole (on the top): For internal cooling Ventilation hole (on the left):... - Page 12 Front of the DS-U2 Power indicator When power is turned on, the indicator first flashes green, and then turns to green. When the indicator lights up in green, the DS-U2 is ready for operation. Power switch This is a push switch.
-
Page 13: Ds Camera Head
Chapter 3 Names of Parts and Their Functions DS Camera Head DS Camera Head Tripod mount Mounts the DS camera head on a tripod, etc. Bottom Rear C mount cap CAMERA OUT connector Protects the C mount from dusts. C mount When taking microphotographs, mount the C mount adapter here before connecting to the microscope. -
Page 14: Chapter 4 Connecting And Installing The Equipment
Connecting and Installing the Equipment Connection Diagrams Connecting and Installing the Equipment Connection Diagrams Schematic diagram DS camera head DS AC adapter USB 2.0 cable camera cable DS-U2 (Front) USB cable provided with the microscope Nikon 80i/90i microscope - 8 -... - Page 15 Chapter 4 Connecting and Installing the Equipment Connection Diagrams Connectors Front of the DS-U2 Trigger signal output device (Can be connected only when DS-Qi1Mc or DS-Ri1 is used.) Nikon 80i/90i microscope Rear of the DS-U2 DS camera cable USB 2.0 cable...
-
Page 16: Installing The Ds-U2
Remove the two screws at the upper front position and the lower rear position among four screws on the right side of the DS-U2. (See Figure A below.) Then, fix the stand to the right surface of the DS-U2 using the removed screws. (See Figure B below.) Use an M2.5-size Phillips driver to attach or detach screws. -
Page 17: Connection Methods
DS camera head can also be used to mount the DS camera head on a tripod. (2) Connecting to a PC with a USB Cable Connect the USB connector on the PC and the USB (D) connector on the DS-U2 using the USB 2.0 cable (AB type). - Page 18 Connect the digital imaging head mounted on the 80i or the 90i microscope to the USB (H) connector of the DS-U2. Be sure to use the USB cable provided with the microscope. (4) When connecting external devices (trigger signal output devices) Before connection, always turn off the DS-U2 and external devices.
- Page 19 For detailed instructions on triggered capture, refer to the software instruction manual. (5) Connecting to a Power Supply Be sure to turn off the DS-U2 before connecting the DS camera head to prevent electric shock. Complete all other connections before connecting to a power supply.
-
Page 20: Chapter 5 Microscope Setting
Chapter 5 Microscope Setting Microscope Setting When the camera head is mounted on a microscope, set up the microscope as described below. (1) Use the appropriate filters When capturing a color image: Insert the NCB filter into the optical path. When capturing a monochrome image: Insert the appropriate filter into the optical path, depending on the photographic purpose. - Page 21 Chapter 5 Microscope Setting (2) Adjusting the field diaphragm Adjust the field diaphragm so that it circumscribes the viewfield. Especially for the fluorescent photo with dark background, be sure to adjust the field diaphragm due to its significant relationship with contrast. Refer to the instruction manual of the microscope for details on adjustment. (3) Adjusting the aperture diaphragm For diascopic illumination: Generally, the numeric value of the condenser aperture diaphragm is adjusted to...
- Page 22 Chapter 5 Microscope Setting (6) Adjusting the exposure time Adjust the illumination for the microscope to a level that yields a suitable exposure time (generally 1/15 to 1/250 s) using a ND filter. Or, adjust the exposure condition of the camera. Terms What is a ND filter? An ND filter is a filter that affects only the amount of light passed, not the color balance of the...
-
Page 23: Chapter 6 Operation Method
Refer to "Specifications" in Chapter 9 for details on those cameras. Installing Application Software To operate the DS-U2, an application software must be installed in the PC connected to the DS-U2 via a USB interface. To use the NIS-Elements freeware package, insert the enclosed CD-ROM in the PC and install it in the following procedures. - Page 24 Click the Next > button. Click here. Click here. To use the Nikon NIS-Elements software, which is sold separately, or another application dedicated to the DS-U2, install it in the PC according to the instruction manual provided with each software. - 18 -...
-
Page 25: Installing The Ds-U2 Device Driver
Installing the DS-U2 Device Driver Installing the DS-U2 Device Driver To connect the DS-U2 with a PC, the device driver must be installed in a PC. For the DS-U2, install the Nikon USB DS Camera (hereafter called "camera driver") and the Eclipse-i Microscope (hereafter called "Eclipse i-series driver"). - Page 26 Chapter 6 Operation Method Installing the DS-U2 Device Driver (2) Install the camera driver. Connect the camera and then install the camera driver. Operation procedure Connecting the USB connector Connect the USB A connector of the USB cable to a USB A connector The PC automatically searches for new hardware.
- Page 27 2. Click here. Click the Have Disk button. Click the Have Disk button. Specify "C:\Program Files\Nikon\Shared\Drivers \DS-U2" for the "Copy manufacturer's files from" entry. Click the OK button. 2. Clisk the OK button. 1. Specify the folder. Select the "Nikon USB DS Camera." And then, click the Next button.
- Page 28 Installing the DS-U2 Device Driver Click the Continue button. Click the Continue button. Specify "C:\Program Files\Nikon\Shared\Drivers \DS-U2" for the Copy From box. And then, click the OK button. 2. Click the OK button. 1. Specify the folder. Click the Finish button.
- Page 29 Chapter 6 Operation Method Installing the DS-U2 Device Driver (3) Install the ECLIPSE-i series driver. Next, drivers for ECLIPSE-i series is installed automatically. The PC automatically searches for new hardware. "Hardware Detection Wizard" dialog box Click the "Install the hardware that I manually select from a list (Advanced)."...
- Page 30 Click the Have Disk button. Click the Have Disc button. Screen for specifying file location Specify "C:\Program Files\Nikon\Shared\Drivers \DS-U2" for the "Copy manufacturer's files from" entry. Click the OK button. 2. Click the OK button. 1. Specify the folder. Screen while installing Select the "Nikon USB Eclipse-i Microscope."...
- Page 31 Screen when installation is completed Click the Continue button. Click the Continue button. Specify "C:\Program Files\Nikon\Shared\Drivers \DS-U2" for the Copy From box. And then, click the OK button. 2. Click the OK button. 1. Specify the folder. Click the Finish button.
- Page 32 Chapter 6 Operation Method Installing the DS-U2 Device Driver (4) Check that the driver is installed. Check that the driver is installed without any troubles. Operation procedure My Computer menu Right-click the My Computer icon and select Properties from the shortcut menu.
- Page 33 Chapter 6 Operation Method Installing the DS-U2 Device Driver Device Manager window Click the Imaging Device icon to open it. Click here. Two imaging devices must be listed: [Nikon USB DS Camera] [Nikon USB Eclipse-i Microscope] Check here. - 27 -...
-
Page 34: Operation
Chapter 6 Operation Method Operation Operation The operation method of the DS-U2 differs depending on the application used together. (1) For the NIS-Elements freeware Function of each icon on the Main Window is described below: <NIS-Elements Freeware --- Main Window --->... - Page 35 Options). For details on the operation method, refer to the online help on the application. NIS-Elements Freeware does not include functions for controlling Nikon 80i or 90i series upright microscopes. For this reason, do not use the following setup. DS-U2...
-
Page 36: Chapter 7 Care And Maintenance
Care and Maintenance Cleaning the System • Use a soft cloth to remove dirt from the DS-U2 and the cables. • After attaching the C mount cap, use a soft cloth to remove dirt from the DS camera head. • Use an air blower to blow away dirt inside the DS camera head mount. While blowing away, be sure not to touch the glass filter on the front of the CCD. -
Page 37: Chapter 8 Troubleshooting
Troubleshooting Power Supply Troubleshooting If you experience any troubles, check the troubleshooting list below. If you are still not able to solve the trouble, consult with your nearest Nikon representative. Power Supply Trouble Check point • Be sure that the power cable is connected. Check the power plug, the The power cannot be turned on. -
Page 38: Image Output To A Pc Monitor
• Check that the USB peripheral equipments such as the USB port, added USB interface board, USB hub are based on the USB 2.0. • Check that the hub connecting the USB port and the DS-U2 is within a level in the tree structure. Using a hub within a level is recommended. - Page 39 Chapter 8 Troubleshooting Image Output to a PC Monitor Trouble Check point • Check that the edge enhancement is set properly using the application The image is out of focus. software. ⇒ Refer to the instruction manual for the application software. •...
- Page 40 Chapter 8 Troubleshooting Image Output to a PC Monitor Trouble Check point • Check that the tone is adjusted correctly with the application software. The contrast is low. ⇒ Refer to the instruction manual for the application software. • Check that the black level is set appropriately with the application software.
-
Page 41: Camera Settings On The Pc
• Check that the USB peripheral equipments such as the USB port, added USB interface board, USB hub are based on the USB 2.0. • Check that the hub connecting the USB port and the DS-U2 is within a level in the tree structure. Using a hub within a level is recommended. -
Page 42: Microscope Control With The Pc
• Check that the USB cable is connected securely between the DS-U2 and the digital imaging head on the 80i microscope or the 90i microscope. • Check that the hub between the microscope and the DS-U2 is within a level in the tree structure. Using a hub within a level is recommended. -
Page 43: Before Contacting Us
Chapter 8 Troubleshooting Before Contacting Us Before Contacting Us Before contacting Nikon or its sales partners, please have the following information ready, as this will speed up the response to your inquiry. Date: (Year) (Month) (Day) Date of purchase: (Year) -
Page 44: Chapter 9 Specifications
Other functions Scene mode Selectable from five biological modes, four industrial modes, and two other modes Autofocus Possible only when connected to the Nikon 90i microscope Image freeze Available USB2.0 host interface Connect the interface to the Nikon 80i/90i microscope. -
Page 45: Ds Camera Head
Chapter 9 Specifications DS Camera Head DS Camera Head DS-Fi1 DS-Qi1Mc Image pickup 2/3-inch square pixel, 2/3-inch square pixel, device 1.50 megapixel interline CCD 5.24 megapixel interline CCD Color/monochrome Monochrome Color Infrared blocking None Built in filter Max. frame rate 19.0 fps (1.3M progressive scan) 5.9 fps (5M interlaced) 31.5 fps (VGA progressive scan) - Page 46 Chapter 9 Specifications DS Camera Head DS-Ri1 Image pickup device 2/3-inch square pixel, 1.50 megapixel interline CCD Color/monochrome Color Infrared blocking filter Built in Max. frame rate *1 19.0 fps (1.3M progressive scan) 31.5 fps (VGA progressive scan) 46.8fps (QVGA progressive scan) 24.2fps (center scan) Number of recordable pixels 1280 x 1024...
- Page 47 Chapter 9 Specifications DS Camera Head DS-2Mv DS-2MBW DS-2MBWc DS-5M DS-5M c Image pickup 1/1.8-inch square pixel, 2/3-inch square pixel, device 2.11 megapixel interline CCD 5.24 megapixel interline CCD Color/monochrome Color Monochrome Color Infrared blocking Built in None Built in filter Max.
-
Page 48: Ds Ac Adapter
Chapter 9 Specifications DS AC Adapter DS AC Adapter Model name F10453C / F1650K / AD-1260B / EA1050E-120 Manufacturer Electricity Power Source (EPS) Inc. (F10453C, F1650K) Midi-Power Electronics Inc. (Manufacturer: Powertron Technology Co., Ltd) (AD-1260B) EDAC POWER Electronics Co., Ltd (EA1050E-120) Rated input voltage 100 to 240 VAC 50/60 Hz 1.2 A maximum Rated output voltage... -
Page 49: Overall Specifications
Chapter 9 Specifications Overall Specifications Overall Specifications Operating environment Temperature 0 to 40 ºC Humidity 60% RH maximum (no condensation) (DS-Qi1Mc and DS-Ri1 only: Can also be used in 0 to 30°C and 80% RH) Altitude 2000 m maximum Pollution degree Degree 2 Installation Category II...
Need help?
Do you have a question about the DS-U2 and is the answer not in the manual?
Questions and answers