Jobs; Creating A New Job - Nikon DTM-302 Series Instruction Manual

The following examples show how various values are entered:
To enter ...
65' 5 3/8"
65'
65' 5"
65' 5 3/8"
5 3/8"
The numerator and denominator that you enter are automatically converted to the
closest value from the following list: 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1/16, 3/16,
5/16, 7/16, 9/16, 11/16, 13/16, 15/16.
If the denominator is 16, it is not shown on the screen.

Jobs

To record data on the instrument, you must create or open a job.
C
Caution – Before you use the instrument for the first time, check the job
settings.

Creating a new job

Press [MENU] to open the MENU screen.
1.
Press [1] to open the Job Manager.
2.
Creat
Press the
3.
Job screen.
Enter the job name.
4.
softkey to open the Create
Total Station DTM-302 Series Instruction Manual 49
Type ...
[6] [5] [.] [5] [.] [3] [.] [8] [ENT]
[6] [5] [ENT]
[6] [5] [.] [5] [ENT]
[6] [5] [.] [5] [.] [6] [ENT]
[0] [.] [5] [.] [3] [.] [8] [ENT] or [0] [.] [5] [.] [6]
[ENT]
Getting Started 3
3.3
33.1