Subscribe to Our Youtube Channel
Related Manuals for Nikon DS-U3
Summary of Contents for Nikon DS-U3
- Page 1 M554E 10.11.NF.1 *M554EN01* DS-U3 DS Camera Control Unit DS Camera Head DS-Fi1/ DS-Vi1 DS Cooled Camera Head DS-Qi1Mc/DS-Fi1c/DS-Ri1 <Instructions> (Ver.1.00)
-
Page 3: Introduction
Introduction Thank you for purchasing a Nikon product. This instruction manual is written for users of the DS-U3 DS Camera Control Unit, DS-Fi1 and DS-Vi1 DS Camera Heads, and DS-Qi1Mc, DS-Fi1c, and DS-Ri1 DS Cooled Camera Heads. To ensure correct usage, read this manual carefully before operating the product. -
Page 4: Table Of Contents
2 Components ........................2 Chapter 2 Peripheral Equipment........................3 Chapter 3 Names of Parts and Their Functions................... 5 1 DS-U3 DS Camera Control Unit..................5 2 DS Camera Head ......................7 Chapter 4 Connecting and Installing the Equipment..................9 1 Connection Diagrams ...................... 9 2 Installing the DS-U3....................... -
Page 5: Safety Precautions
Safety Precautions To ensure correct and safe operation, read this manual before using the product. Warning and Caution Symbols Used in This Manual Although this product is designed and manufactured to be completely safe during use, incorrect usage or failure to follow the safety instructions provided may cause personal injury or property damage. - Page 6 To prevent fire or burn injury due to the breakage of a cable, do not bend nor twist the cables excessively. • To prevent fire due to heating, do not place a cloth or paper on the DS-U3 nor block the vent of the DS-U3. - iv -...
- Page 7 2. Turn off the power before assembling the product or connecting /disconnecting cables. To prevent failure or malfunction, be sure to turn off the power switch of the DS-U3 before assembling the product or connecting/disconnecting a cable.
- Page 8 Safety Precautions ☆☆☆ - vi -...
-
Page 9: Chapter 1 Before Use
Chapter 1 Before Use Models of the DS Camera Head Before Use Models of the DS Camera Head There are five models available for the DS camera head as follows. The features differ depending on the model you have purchased. Check the model name indicated on the DS camera head before use. Model name is indicated on the tripod mount or a place near the location for the camera cap attachment. -
Page 10: Components
Before Use Components Components Check that all items listed below are provided in the package. If any items are missing, contact your nearest Nikon representative immediately. DS-U3 DS Camera Control Unit Power cord Vertical stand DS camera cable (DS Camera I/F cable 20-26;... -
Page 11: Chapter 2 Peripheral Equipment
Peripheral Equipment Peripheral Equipment (1) PC The DS-U3 is designed for use with a PC connected via an IEEE1394b (bilingual) interface. The DS-U3 performs the following operations via NIS-Elements freeware installed on a PC. Display captured images on the PC monitor Confirm/change the setting (for photographing conditions, etc.) of the DS-U3... - Page 12 Chapter 2 Peripheral Equipment (2) IEEE1394b cable IEEE1394b cable is used to connect the DS-U3 to the PC. We recommend a cable provided with the IEEE1394b FireWire PCIe Card. (3) C mount lens The C mount lens is required to photograph subjects other than photomicrographs. Any lens that meets the following conditions may be used: •...
-
Page 13: Chapter 3 Names Of Parts And Their Functions
Names of Parts and Their Functions DS-U3 DS Camera Control Unit Names of Parts and Their Functions DS-U3 DS Camera Control Unit (1) External appearance of the DS-U3 Ventilation hole (on the top) For internal cooling. Ventilation hole (on the left) For internal cooling. - Page 14 Press again to release green. When the indicator lights up in and turn it off. When the power is green, the DS-U3 is ready for operation. on, the power indicator lights up. (3) Rear of the DS-U3 CAMERA 1 connector Connects to the DS camera head.
-
Page 15: Ds Camera Head
Chapter 3 Names of Parts and Their Functions DS Camera Head DS Camera Head Tripod mount Mounts the DS camera head on a tripod, etc. Bottom Rear C mount cap CAMERA OUT connector Protects the C mount from dusts. C mount When taking microphotographs, mount the C mount adapter here before connecting to the microscope. - Page 16 Chapter 3 Names of Parts and Their Functions ☆☆☆ - 8 -...
-
Page 17: Chapter 4 Connecting And Installing The Equipment
Chapter 4 Connecting and Installing the Equipment Connection Diagrams Connecting and Installing the Equipment Connection Diagrams (1) Schematic diagram DS camera head DS AC adapter camera IEEE1394b cable cable DS-U3 (Front) - 9 -... - Page 18 Chapter 4 Connecting and Installing the Equipment Connection Diagrams (2) Connectors (Rear of the DS-U3) CAMERA 1 connector CAMERA 2 connector DC IN 12V IEEE1394 CAMERA1 CAMERA2 EXT.I/O camera cable Trigger signal output device (Can be connected only when DS-Qi1Mc is used.)
-
Page 19: Installing The Ds-U3
Remove two of the four screws at the upper front position and the lower rear position on the right side of the DS-U3. (See Figure A below.) Then, fix the stand to the right surface of the DS-U3 using the screws that have been removed. (See Figure B below.) Use an M2.5-size Phillips driver to attach or remove screws. -
Page 20: Connection Methods
Be sure to turn off the DS-U3 before connecting the DS camera head. Plug one end of the supplied camera cable into the camera connector on the DS-U3, and the other end into the CAMERA OUT connector on the DS camera head. Plug the cable into the connectors while pinching the locking tabs. - Page 21 Connection Methods (3) When connecting external devices (trigger signal output devices) Before making a connection, always turn off the DS-U3 and external devices. When the DS-Qi1Mc is connected, image capture can be triggered from an external device by supplying trigger signals to the EXT. I/O connector.
- Page 22 For detailed instructions on triggered image capture, refer to the software instruction manual. (4) Connecting to a Power Supply Be sure to turn off the DS-U3 before connecting the DS camera head to prevent electric shock. Make all other connections before connecting to a power supply.
-
Page 23: Chapter 5 Microscope Setting
Chapter 5 Microscope Setting Microscope Setting When the camera head is mounted on a microscope, set up the microscope as described below. (1) Use the appropriate filters When capturing a color image: Insert the NCB filter into the optical path. When capturing a monochrome image: Insert the appropriate filter into the optical path, depending on the photographic purpose. - Page 24 Chapter 5 Microscope Setting (2) Adjusting the field diaphragm Adjust the field diaphragm so that it circumscribes the viewfield. Especially for the fluorescent photo with dark background, be sure to adjust the field diaphragm due to its significant relationship with contrast. For details on adjustment, refer to the instruction manual of the microscope. (3) Adjusting the aperture diaphragm For diascopic illumination: Normally, the numeric value of the condenser aperture diaphragm is adjusted to...
- Page 25 Chapter 5 Microscope Setting (6) Adjusting the exposure time Adjust the illumination for the microscope to a level that yields a suitable exposure time (normally 1/15 to 1/250 s) using an ND filter. Otherwise, adjust the exposure condition of the camera. Terms What is an ND filter? An ND filter is a filter that affects only the amount of light passed, not the color balance of the...
- Page 26 Chapter 5 Microscope Setting ☆☆☆ - 18 -...
-
Page 27: Chapter 6 Operation Method
Connecting a Camera Head Operation Method Connecting a Camera Head The DS-U3 is applicable for five models of camera heads listed below. The control unit (DS-U3) mode is automatically switched by changing the camera head. DS-Fi1 5-megapixel CCD / color... -
Page 28: Installing The Ds-U3 Device Driver
Installing the DS-U3 Device Driver Installing the DS-U3 Device Driver To connect the DS-U3 with the PC, the device driver must be installed in the PC. Follow the procedure below to install the device driver. Note: Administrator login is required to install the DS-U3 device driver. - Page 29 Chapter 6 Operation Method Installing the DS-U3 Device Driver (2) Update the IEEE1394 driver. Follow the procedure below to update the IEEE1394 driver. Operation procedure 1. Run the “t1394bus_v1.33.0_Nikon.exe” in the installer CD folder. If the [User Account Control] dialog box appears, click the [Yes] button to continue.
- Page 30 Chapter 6 Operation Method Installing the DS-U3 Device Driver 4. When the installation is complete, the wizard displays the sceen shown on the left. Click the [Next] button. Click the [Next] button. 5. Click the [Finish] button to quit the IEEE1394 installation wizard.
- Page 31 Chapter 6 Operation Method Installing the DS-U3 Device Driver 8. When the [Windows Security] dialog box appears, click the [Install] button. Click the [Install] button. 9. Check that the “Driver Provider” for the IEEE1394 host controller selected above has changed to “Thesyoon”.
-
Page 32: Installing Application Software
Installing Application Software Installing Application Software To operate the DS-U3, an application software must be installed on the PC connected to the DS-U3 via an IEEE 1394 interface. To use the NIS-Elements freeware package, insert the suppled CD-ROM on the PC and install it in the following procedures. -
Page 33: Installing Application Software
6. Click the [X] button to close the window. Click the [ ] button. To use the Nikon NIS-Elements software, which is sold separately, or another application dedicated to the DS-U3, install it in the PC according to the instruction manual provided with each software. - 25 -... -
Page 34: Operation
Operation Method Operation Operation The operation method of the DS-U3 differs depending on the application used together. (1) For the NIS-Elements freeware NIS-Elements freeware is provided with various functions that can be accessed from icons on the Main Window. Icon functions are described below: Description of icons 1. - Page 35 Chapter 6 Operation Method Operation This command can save a captured or modified picture on hard disk. Opens a printing dialog window that enables you to print the current image if a printer is present. This button creates a basic image report. It makes a pdf file that contains the current image, its name, path, dimensions, and the file date.
- Page 36 (2) For the NIS-Elements software sold separately or other applications dedicated to the DS-U3 Operate the DS-U3 with reference to the instruction manual provided with each software. Keep the following requirements in mind when running the NIS-Elements software. This is because if the computer enters the Standby mode, live images will not be updated after the computer wakes up.
-
Page 37: Chapter 7 Care And Maintenance
Care and Maintenance Cleaning the System • Use a soft cloth to remove dirt from the DS-U3 and the cables. • After attaching the C mount cap, use a soft cloth to remove dirt from the DS camera head. • Use an air blower to blow away dirt inside the DS camera head mount. While blowing away, be sure not to touch the glass filter on the front of the CCD. - Page 38 Chapter 7 Care and Maintenance ☆☆☆ - 30 -...
-
Page 39: Chapter 8 Troubleshooting
Chapter 8 Troubleshooting Power Supply Troubleshooting If you experience any troubles, check the troubleshooting list below. If you are still not able to solve the trouble, consult with your nearest Nikon representative. Power Supply Trouble Checkpoints The power cannot be •... -
Page 40: Application Software Startup
• Check that the device driver is properly installed. • Check that the application software is properly installed. When the DS-U3 is recognized by the PC, “Nikon 1394 DS Camera” is found under “Imaging devices” on the [Device Manager] screen. - Page 41 Chapter 8 Troubleshooting Image Output to a PC Monitor Trouble Checkpoints • Check that the edge enhancement is set properly using the application The image is out of focus. software. ⇒ Refer to the instruction manual for the application software. •...
- Page 42 Checkpoints A specific area of an • Shading correction read may have been failed. image is brighter or Restart the DS-U3. darker than the rest of the image. The image is blurred. • Motion-blur can occur when capturing images of a moving subject with DS-Fi1 or DS-Fi1c in interlaced mode.
-
Page 43: Camera Settings On The Pc
The specified device driver can be found on the supplied CD-ROM. incorrect settings • Check that the application software in use is compatible with the DS-U3. result.) • Check that the DS-U3 and the PC are connected with the IEEE1394b cable. -
Page 44: Before Contacting Us
Chapter 8 Troubleshooting Before Contacting Us Before Contacting Us Before contacting Nikon or its sales partners, please have the following information ready, as this will speed up the response to your inquiry. Date: (Year) (Month) (Day) Date of purchase: (Year) -
Page 45: Chapter 9 Specifications
Chapter 9 Specifications DS-U3 DS Camera Control Unit Specifications DS-U3 DS Camera Control Unit Camera control system Exposure control system Program AE, shutter speed priority AE, focus AE, manual with single-push AE function Photometry Average photometry, peak hold photometry, photometry area position/size selectable... -
Page 46: Ds Camera Head
Chapter 9 Specifications DS Camera Head DS Camera Head DS-Vi１ DS-Fi1 2/3-inch square pixel, 1/1.8-inch square pixel, Image pickup device 5.24 megapixel interline CCD 2.11 megapixel interline CCD Color/monochrome Color Infrared blocking Built in filter 5.9 fps (5M interlaced) 14.9 fps (2M progressive scan) Max. - Page 47 Chapter 9 Specifications DS Camera Head Fi1c DS-Ri1 DS-Qi1Mc 2/3-inch square pixel, 2/3-inch square pixel, 2/3-inch square pixel, Image pickup device 1.50 megapixel interline CCD 5.24 megapixel interline CCD 1.50 megapixel interline CCD Color/monochrome Monochrome Color Infrared blocking None Built in filter 19.0 fps 19.0 fps...
-
Page 48: Ds Ac Adapter
Conforming standards GS, CE, and UL Be sure to connect the DS AC adapter to the DS-U3 in the following cases: - when using a DS-Qi1Mc, DS-Fi1c, or DS-Ri1 camera head - when using two camera heads connected to the DS-U3 regardless of camera head models - when PC does not have sufficient power capacity Failure to use the DS AC adapter in any of the cases above may reduce performance of the device. -
Page 49: Overall Specifications
Chapter 9 Specifications Overall Specifications Overall Specifications Operating environment Temperature 0 to 40 ºC Humidity 60% RH maximum (no condensation) (DS-Qi1Mc and DS-Ri1 only: Can also be used in 0 to 30°C and 80% RH) Altitude 2,000 m maximum Pollution degree Degree 2 Installation Category II...
Need help?
Do you have a question about the DS-U3 and is the answer not in the manual?
Questions and answers