Searching; Settings; Stakeout - Nikon DTM-302 Series Instruction Manual

Searching

PT Not Found
There is no point that matches the criteria you entered.
Press any key to return to the point input screen.
This message may appear in any function where the PT/CD is input, such as Station
Setup or Stakeout.

Settings

Job Settings will be changed
You have changed one or more of the following job settings:
• VA zero or HA in the Angle screen (see Angle, page 127)
• Scale, T-P, Sea Lvl, or C&R in the Distance screen (see Distance, page 128)
• Coord or Az Zero in the Coordinates screen (see Coordinate, page 130)
• Angle, Dist, Temp, or Press in the Unit screen (see Unit, page 131)
To ...
discard the changes to the job settings
close the current job and save the changes
to the job settings
Note – To record a point using the new settings, create a new job using the new
settings.

Stakeout

Input Error
The point name style used in the Fr field is not the same as the style used in the To
field. For example, the Fr field style is 1, and the To field style is A200.
Press any key to return to the Fr/To input screen. Then re-enter the point name,
using the same naming style in both fields.
Total Station DTM-302 Series Instruction Manual 201
Error Messages 10
Press ...
Abrt
[ESC] or the
current job remains open.
OK
[ENT] or the
softkey
10.8
108.1
10.9
109.1
softkey. The
10.10
1010.1