Measuring Distance And Offset Values On The Vertical Plane - Nikon DTM-302 Series Instruction Manual

You can use an REM measurement to update the height of target. Take a
measurement to the prism, sight the bottom of the prism pole, and press [ENT].

Measuring distance and offset values on the vertical plane

To enter the 2-Pt Reference Plane function,
1.
press [6] or select
V-Plane
in the Programs menu.
Enter two points to define the plane.
2.
– To enter the point by direct measurement,
MSR
press the
When you press the
observation screen appears.
Press [MSR1] or
3.
appears.
softkey.
MSR
softkey, a temporary
[MSR2] . The Record PT screen
Total Station DTM-302 Series Instruction Manual 91
Baseline
Applications 4
40.1