Table of Contents
Advertisement
UPS5000-A-30 kVA, 40 kVA and 80 kVA
User Manual
Figure 4-37 Site configuration
●
●
●
●
●
●
●
●
Issue 13 (2022-01-19)
The NTP parameters are used to set the NTP server address, port number, and
synchronization interval.
The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the
password after your first login, preventing unauthorized access.
NO TE
● The standard protocols SNMP V1 and SNMP V2 have security risks. You are advised
to use the secure protocol SNMP V3.
● The standard encryption algorithms MD5 and DES have security risks. You are
advised to use the secure encryption algorithms SHA and AES.
To obtain the MIB file, choose Config. > Site Config. > SNMP > Download
HUAWEI_UPS_MIB.
The SNMP Trap is used to set the IP address of a server on which the NMS
software is installed. The trap port needs to be the same as that on the NMS.
If SNMP Trap is incorrectly set or not set, system information will be lost or
not reported in time.
The certificate is used for Secure Sockets Layer (SSL) encryption protection for
WebUI login. You need to apply to a third-party institution for the certificate.
Configuration Management is used to upload and export configuration
parameters in the monitoring system.
Multi-brand Management is used to import the brand information of a
partner to the corresponding WebUI.
Specify Email server IP address, Sender's email, and User account
authentication required when sending a mail and click Test to check
whether the test email can be received. Configure Alarm Notification Server
Copyright © Huawei Technologies Co., Ltd.
4 LCD and WebUI
136
Advertisement
Table of Contents
