Pepperl+Fuchs IUH-F190-V1 Series Manual page 55

IUH-F190-V1-*
Operation
If QV = M, the following responses are made to a single read command (SR):
Response:
One read command was executed to which three tags responded. For each tag, the status, the
IDENTControl channel, the length of the UII, the UII, the length of the data, and the read data
are output. Then an output is issued with status F, the IDENTControl channel, and the number
of tags that responded.
<Luii> = Length of <UII> in bytes, 2 bytes
<Ldata> = Length of <data> in bytes, 2 bytes
Responses Depending on Protocol Mode QV
Parameter QV
Single-frame protocol
Command Responses
SS No tag:
5<ChanNo>
One tag:
0<ChanNo><UII>
Two tags:
A<ChanNo>
SR, #SR No tag:
SF 5<ChanNo>
One tag:
0<ChanNo><data>
Two tags:
A<ChanNo>
SW, #SW No tag:
5<ChanNo>
One tag:
0<ChanNo>
Two tags:
A<ChanNo>
ES No tag:
5<ChanNo>
One tag added:
0<ChanNo><UII>
One tag added:
A<ChanNo>
One tag removed:
0<ChanNo><UII>
All tags removed:
5<ChanNo>
Table 7.2 <CHCK><ETX> omitted at the end of each response due to space requirements
0<ChanNo><Luii><UII1><Ldata><data><CHCK><ETX>
0<ChanNo><Luii><UII2><Ldata><data><CHCK><ETX>
0<ChanNo><Luii><UII3><Ldata><data><CHCK><ETX>
F<ChanNo>0003<CHCK><ETX>
Multiframe protocol
No tag:
F<ChanNo>0000
Two tags:
0<ChanNo><Luii><UII1>
0<ChanNo><Luii><UII2>
F<ChanNo>0002
No tag:
F<ChanNo>0000
Two tags:
0<ChanNo><Luii><UII1><Ldata><data>
0<ChanNo><Luii><UII2><Ldata><data>
F<ChanNo>0002
No tag:
F<ChanNo>0000
Two tags:
0<ChanNo><Luii><UII1>
0<ChanNo><Luii><UII2>
F<ChanNo>0002
No tag:
5<ChanNo>
Two tags added:
0<ChanNo><Luii><UII1>
0<ChanNo><Luii><UII2>
Tag 1 removed:
5<ChanNo><Luii><UII1>
Tag 3 added:
0<ChanNo><Luii><UII3>
Tag 4 added (UII same as tag 2):
A<ChanNo><Luii><UII2>
All tags removed:
5<ChanNo><Luii><UII2>
5<ChanNo><Luii><UII3>
5<ChanNo><Luii><UII2>
55