South Korea; Thailand - Pepperl+Fuchs IUH-F190-V1 Series Manual

IUH-F190-V1-*
Product Description
Channel spacing: 200 kHz
■
Frequency access method: programmable frequency list
■
Number of predefined channels: 10
■
Programmable channels: 1, 2, 3, ... 10
Center frequencies: 866.1 MHz, 866.3 MHz, 866.5 MHz, 866.7 MHz, 866.9 MHz, 867.1
MHz, 867.3 MHz, 867.5 MHz, 867.7 MHz, 867.9 MHz
Up to 10 channels can be parameterized and used in sequence.
Default: dense reader mode on channel 1, 7, 4, 10. See chapter 4.2.6.
In Singapore, the use of RFID in the UHF range of 920 MHz to 925 MHz is regulated as follows.
UHF wavelength: 920 MHz ... 925 MHz
■
Radiated power: 30 mW ... 300 mW
■
Channel bandwidth: 500 kHz
■
Channel spacing: 500 kHz
■
Frequency access method: frequency hopping spread spectrum. See chapter 4.2.7.
■
Number of channels: 10
■
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All 10 channels are always used.
4.3.16

South Korea

In South Korea, the use of RFID in the UHF range is regulated as follows:
UHF wavelength: 917.2 MHz ... 920.4 MHz
■
Radiated power: 50 mW ... 500 mW
■
Channel bandwidth: 200 kHz
■
Channel spacing: 600 kHz
■
Frequency access method: frequency hopping spread spectrum. See chapter 4.2.7.
■
Number of channels: 6
■
Channels used: 1, 4, 7, 10, 13, 16
Center frequencies: 917.1 MHz + (M x 0.20) MHz
All 6 channels are always used.
4.3.17

Thailand

In Thailand, the use of RFID in the UHF range is regulated as follows:
UHF wavelength: 920 MHz ... 925 MHz
■
Radiated power: 50 mW ... 500 mW
■
Channel bandwidth: 500 kHz
■
Channel spacing: 500 kHz
■
Frequency access method: frequency hopping spread spectrum. See chapter 4.2.7.
■
; Default = 80 mW
ERP ERP
; Default = 125 mW
EIRP EIRP
; Default = 125 mW
EIRP EIRP
(IUH-F190-V1-FR2)
(IUH-F190-V1-FR2)
(IUH-F190-V1-FR2)
21