Indicators And Operating Controls; Connection - Pepperl+Fuchs IUH-F190-V1 Series Manual

IUH-F190-V1-*
Product Description
Integrated Antenna
The IUH-F190-V1-EU read/write head has a fully circular polarized antenna.
The IUH-F190-V1-FR1 and the IUH-F190-V1-FR2 read/write head have a linear dual polarized
antenna. The read/write heads can transmit and receive waves with horizontal, vertical, and
circular polarization.
4.5

Indicators and Operating Controls

The IUH-F190-V1-* read/write head has 3 LEDs, which are green/blue/yellow. The various
indicators mean:
Green LED:
■
Continuously on - Power on
Flashing - Region code must be set. See chapter 6.2.
Blue LED: Transmission mode
■
Yellow LED: Read/write operation successful
■
4.6

Connection

The read/write head is connected to the IDENTControl control interface via the M12 x 1
connector.
2
Figure 4.7
Ground connection
The ground connection of the read / write head is on the right side when the cable outlet faces
downward. Connect the protective earth conductor to the casing the with a crimp connector. To
ensure proper grounding, you must install the lock washer between the crimp and the housing.
1
1 Housing
2 Serrated lock washer
3 Crimp connector
4 Lock screw
Use a conductor cross section of at least 4 mm
Tighten the lock screw with a torque of 1.6 Nm ±0,4 Nm
24
1
5
4
3
2 3
1 +
2 A
3 -
4 B
5 do not connect
Shield
4
2
for the protective earth conductor.