Pepperl+Fuchs IUH-F190-V1 Series Manual page 49

IUH-F190-V1-*
Operation
Abbre-
viation Page
NC See "Number of Channels NC" on
page 53
NT See "Search Algorithm Cancellation
Criteria "number of tags to find" NT"
on page 53
PT See "Transmission Power "Power
Transmit" PT" on page 54
QV See "Protocol Mode QV" on page 54 Readable/writeable
QW See "Q Value QW" on page 56
RC See "Country Identifier, "Region
Code" RC" on page 56
RD See "Reset to Default, RD" on page
57
SM See "Transmission Pauses in
"Sensing Mode" SM" on page 57
TA See "Number of Attempts "Tries
Allowed" TA" on page 58
1.Readable only for IUH-F190-V1-FR2-02
The parameters are saved in the read/write head as nonvolatile.
Read Parameters
The RP command reads configuration parameters from the read/write head.
Command: RP <ChanNo> <SystemCode> <ParamTyp> <DataLength> <Data> <CHCK>
Response: <Status> <ChanNo> <Data> <CHCK> <ETX>
<SystemCode> = U
<ParamTyp> = 2 bytes ASCII
<DataLength> = Length of <Data> in command, 2 bytes binary
<Data> = Optional additional information
Example:
RP1UE5.00.00 outputs the number of unsuccessful read attempts until status 5.
Write Parameters
Command WP writes configuration parameters to the read/write head.
Command: WP <ChanNo> <SystemCode> <ParamTyp> <DataLength> <Data> <CHCK>
Response: <Status> <ChanNo> <CHCK> <ETX>
<SystemCode> = U
<ParamTyp> = 2 bytes ASCII
<DataLength> = Length of <Data>, 2 bytes binary
<Data> = Optional additional information
Example:
WP1UE5.00.01.05 sets the number of unsuccessful read attempts to status 5 on 5 attempts.
<ETX>
for IUH-*
ASCII
<ETX>
for IUH-*
ASCII
Parameter is readable/writeable
IUH-F190-V1-EU IUH-F190-V1-FR*
Readable/writeable for RC = 2, 3, 7, 9, 10, 11,
12, 13, 14
Readable for RC = 1, 4, 5, 6, 8
Readable/writeable Readable/writeable
Readable/writeable Readable/writeable
Readable/writeable
Readable/writeable Readable/writeable
Readable/writeable
Readable/writeable
Writeable Writeable
Readable/writeable Readable/writeable
Readable/writeable Readable/writeable
1
49