United States Of America; Vietnam - Pepperl+Fuchs IUH-F190-V1 Series Manual

Read / write head for identcontrol
Hide thumbs Also See for IUH-F190-V1 Series:
Table of Contents

Advertisement

IUH-F190-V1-*
Product Description
Number of channels: 10
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All 10 channels are always used.
4.3.18

United States of America

In the USA, the use of RFID in the UHF range is regulated in accordance with the Federal
Communications Commission (FCC) Rules.
UHF wavelength: 902 MHz ... 928 MHz
Radiated power: 50 mW ... 500 mW
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum (USA). See chapter
4.2.7.
Number of channels: 50
Channels used: 1, 2, 3, ... 50
Center frequencies: 902.25 MHz + (M x 0.5) MHz
All 50 channels are always used.
4.3.19

Vietnam

In Vietnam, the use of RFID in the UHF range of 866 MHz to 868 MHz is regulated in
accordance with EN 302208.
UHF wavelength: 866 MHz ... 868 MHz
Radiated power: 30 mW ... 300 mW
Radiated power: 20 mW ... 200 mW
Channel bandwidth: 200 kHz
Channel spacing: 200 kHz
Frequency access method: programmable frequency list
Number of predefined channels: 10
Programmable channels: 1, 2, 3, ... 10
Center frequencies: 866.1 MHz, 866.3 MHz, 866.5 MHz, 866.7 MHz, 866.9 MHz, 867.1
MHz, 867.3 MHz, 867.5 MHz, 867.7 MHz, 867.9 MHz
Up to 10 channels can be parameterized and used in sequence.
Default: dense reader mode on channel 1, 7, 4, 10. See chapter 4.2.6.
The regulations for the UHF frequency range of 920 MHz to 925 MHz in Vietnam are the same
as the regulations for the UHF frequency range in Singapore. See chapter 4.3.15.
22
; Default = 125 mW
EIRP
EIRP
; Default = 50 mW
ERP
ERP
; Default = 50 mW
ERP
ERP
(IUH-F190-V1-FR2-02)
(IUH-F190-V1-FR1)
(IUH-F190-V1-EU)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iuh-f190-v1-euIuh-f190-v1-fr

Table of Contents