IUH-F190-V1-*
Installation
5
Installation
5.1
Storage and transport
For storage and transport purposes, package the unit using shockproof packaging material
and protect it against moisture. The best method of protection is to package the unit using the
original packaging. Furthermore, ensure that the ambient conditions are within allowable range.
5.2
Unpacking
Check the product for damage while unpacking. In the event of damage to the product, inform
the post office or parcel service and notify the supplier.
Check the package contents against your purchase order and the shipping documents for:
Delivery quantity
■
Device type and version in accordance with the type label
■
Any accessories ordered
■
Retain the original packaging in case you have to store or ship the device again at a later date.
Should you have any questions, please contact Pepperl+Fuchs.
5.3
Mounting
The read/write head is intended for wall mounting or mounting on brackets in internal areas.
Please mount the read/write head using only the holes provided in the housing. The preferred
mounting direction is with the cable connection facing vertically downwards.
Note!
Do not lay the connection cable in the main beam direction of the antenna.
Use
For attaching the read / write head use 3 screws with 4 mm diameter and mounting material that
is matched to the nature of the subsurface.
The tightening torque of the screws depends on the type of attachment.
Caution!
Mounting the read / write head
Make sure that the read / write head is firmly attached to the underground.
28