Show Command Screen; Figure 3-1. Show Command Screen - Simplex Contact Closure DACT Installation And Programming Instructions

Programming the CCDACT,

Show Command Screen

Continued
Note:
The following information does not apply if you are using the QSI
hand-held terminal.
If you are not at the C> prompt, press ESC. Once you are at the C> prompt, type
SHOW to see the Present Program Defaults. Then press [↵] or [↓].
The screen shows all main parameter settings (menu items 00 through 31).

Figure 3-1. Show Command Screen

3-17
firealarmresources.com
Continued on next page