Yamaha TMAX XP500F 2015 Service Manual page 434

Release the seat open/parking switch after the smart key system indicator light " " flashes 1 time. →
The first digit of the identification number has been set as 1. →
Push and hold the seat open/parking switch again. →
Release the seat open/parking switch after the smart key system indicator light " " flashes 2 times.
→
The second digit of the identification number has been set as 2. →
Repeat the above procedure until all 6 digits of the identification number have been set.
The emergency mode will become deactivated under either of the following conditions. If the emer-
gency mode is deactivated, repeat the procedure from step 4.
• During the identification number input procedure, there are no seat open/parking switch operations
for 10 seconds or more.
• The smart key system indicator light " " flashes 10 times or more.
8. The smart key system indicator light " " will come on for 10 seconds if the correct 6-digit identifica-
tion number was entered.
9. Press the ON/start switch "
vehicle power.
TIP
• If the identification number is not correctly entered, the smart key system indicator light " " will flash
quickly for 3 seconds and the emergency mode will become deactivated. If the emergency mode is
deactivated, repeat the procedure from step 4.
• If the smart key is lost, this procedure can be performed using the spare mechanical key and the smart
key identification number. In addition, the spare mechanical key and the smart key identification num-
ber can be used to start the engine and register a new smart key.
EAS31536
REGISTERING A SMART KEY
The following procedure can be used to register additional smart keys or a new smart key in case the
original smart key is lost.
TIP
• A maximum of 6 smart keys can be registered to the smart key unit.
• Be sure to register the smart keys one at a time. Do not register multiple smart keys at the same time.
" while the smart key system indicator light " " is on to turn on the
8-77
SMART KEY SYSTEM