Adjusting The Windshield Height; Removing The Front Under Cover; Installing The Front Under Cover - Yamaha TMAX XP500F 2015 Service Manual

▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31397

ADJUSTING THE WINDSHIELD HEIGHT

1. Adjust:
• Windshield height
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the windshield cover and windshield
assembly.
Refer to "REMOVING THE WINDSHIELD"
on page 4-4.
b. Remove the rubber caps "1".
c. Install the rubber caps "1" in the desired posi-
tion.
d. Install the windshield assembly to the desired
position by installing the bolts "1".
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
4-5
GENERAL CHASSIS (1)
e. Tighten the bolts to the specified torque.
Windshield bracket bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
f. Installing the windshield cover.
Refer to "INSTALLING THE WINDSHIELD"
on page 4-4.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31517

REMOVING THE FRONT UNDER COVER

1. Remove:
• Front under cover
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the quick fasteners "1".
b. Pull the claws "2" of the front under cover to
the front side and remove them.
2
2
2
1
1
2
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31518

INSTALLING THE FRONT UNDER COVER

1. Install:
• Front under cover
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲