Yamaha TMAX XP500F 2015 Service Manual page 433

3. Open the seat. Check that the storage box light comes on when the seat is opened. If the storage
box light does not come on, check the storage box light and storage box light switch.
4. Push the ON/start switch "
5. With the seat opened, raise and lower the seat (without completely shutting it) 3 times within 10 sec-
onds. Use the storage box light as a guide when raising and lowering the seat. When the emergency
mode is activated, the smart key system indicator light " " on the meter will come on for 3 seconds.
1. Smart key system indicator light " "
6. After the smart key system indicator light " " goes off, use the seat open/parking switch to enter the
smart key identification number "1" located inside the smart key case (open the smart key case as
shown) or the identification number "2" located on the key tag. (Refer to the following procedure on
how to input the identification number.)
7. The input identification number is indicated by the number of flashes of the smart key system indi-
cator light " " while the seat open/parking switch is pushed.
For example, if the smart key identification number is 123456:
Push and hold the seat open/parking switch. →
The smart key system indicator light " " will start to flash. →
".
2
8-76
SMART KEY SYSTEM
1
1