Yamaha TMAX XP500F 2015 Service Manual page 71

1. Rear brake hose
2. Speed sensor lead
3. Horn lead
4. Left handlebar switch lead
5. Right handlebar switch lead
6. Front brake hose
7. Throttle cables
8. Rear brake lock cable
9. Brake light switch connectors
A. Fasten the rear brake hose with the holder. Face
the catch of the holder downward.
B. Fasten the front brake hose, speed sensor lead,
and horn lead with the holder. Face the catch of the
holder to the left.
C. Fasten the front brake hose with the holder. Face
the catch of the holder downward.
D. Fasten the rear brake hose with the holder.
E. Route the throttle cables over the front brake hose.
F. Route the throttle cables to the rear of the
handlebar switch leads and to the front of the rear
brake lock cable.
G. Route the right handlebar switch lead to the front
of the throttle cables, and then route it through the
opening in the lower handlebar holder toward the
front of the vehicle.
H. Route the rear brake hose to the front of the
handlebar, and then route it through the opening in
the lower handlebar holder toward the rear of the
vehicle.
I. Route the left handlebar switch lead to the front of
the rear brake lock cable, and then route it through
the opening in the lower handlebar holder toward
the front of the vehicle.
J. Route the rear brake lock cable to the rear of the
handlebar switch leads and throttle cables.
K. Route the speed sensor lead over the handlebar
switch leads.
L. Face the catch of the holder to the right.
M. Install the brake light switch connectors so that the
leads are routed inward.
2-38
CABLE ROUTING