Key Features; Minimum System Configurations - Johnson Controls FC-2000 Installing

System expansion must comply with the:
See this section for a description of the various optional modules, and the
Installation section of this document for installation information.
The FC-2000 has the following important features:

Key Features

The following FC-2000 components are required for compliance with
Minimum
NFPA standards 71 and 72:
System
Configurations
1. BE-2000 Basic Equipment Package, which includes:
2. An IZM-8 Initiating Zone Module for up to eight Style B initiating
3. Main Power Supply (MPS-24A or MPS-24B)
4. Standby Batteries--Refer to the Calculating Power Supply
5. Cabinet (CAB-A3, B3, C3 or D3)
4 Installation—Installing the FC-2000
All manuals and user guides at all-guides.com
physical limitations of the cabinet configuration
electrical limitations of the system power supply
capacity of the secondary power source (standby batteries)
Distributed microprocessor electronics using latest technology
Field programmable in minutes using front panel touch switches
Large system capacity, conventional or addressable/intelligent devices
Voice alarm options with solid state messages
Extensive line of serial annunciators
Manual On/Off/Disable control for all indicating appliance circuits
and control relays
Plug-in terminal blocks for ease of field wiring
Walk test any portion of system while remainder provides fire
protection
Liquid crystal display and printer options
CPU-2000 Central Processor Module, VP-1 Vented Dress Panel,
BP-3 Battery Dress Panel, CHS-4 Chassis, interconnecting cables,
and instruction manuals
device circuits or an AIM-200 Addressable Intelligent Module for up
198 addressable devices
Requirements section of this document.