As - Ce Standard Specifics; Overload Test; Functional Test - Haulotte STAR 6 Operator's Manual

Telescopic masts
G
- Technical characteristics
4 -

AS - CE standard specifics

The following tests must be performed after :
• A major technical intervention.
• An accident which results in major component failure on the machine.
• The following tests must be performed by a qualified person in secure conditions.
• The test results must be fully recorded.
To avoid the machine tipping over, it must be secured during the test (by a chain or anchorage point).
4.1 -

OVERLOAD TEST

The overload test is performed with 125 % of the nominal load. See paragraph 1.12.3 of the
AS1418.10 standard for test details.
Load table
Machine
STAR 6
STAR 6 P
STAR 8
STAR 10
STAR 26J
The machine must not show any signs of permanent distortion after the test.
Tests to be performed by a qualified competent person under optimal conditions and results must be fully
recorded.
4.2 -

FUNCTIONAL TEST

Functional tests shall confirm the following: :
• The machine performs all movements without jerking, while carrying the nominal load.
• All security systems are operating correctly.
• Maximum authorized operating speeds are not exceeded.
2420343790
Test load
Pound (lb) Kilogramme (kg)
496
496
551
551
626
e10.11
225
225
250
250
284
93
AUS
A
B
C
D
E
F
G
H
I