Risk Of Uncontrolled Movement And Overturning - Haulotte HA16X Operator's Manual

Engine-powered articulated lifts, 12 - 26 m
A
- Safety precautions
Never use the machine as a welding earth.
Maintain a minimum safe distance with regard to power lines and electrical devices.
Respect the local rules and the minimum safety distance from power lines..
Minimum safety distance
Electric voltage
0 - 300 V
300 V - 50 kV
50 - 200 kV
200 - 350 kV
350 - 500 kV
500 - 750 kV
750 - 1000 kV
N.B.-:-T
HIS TABLE IS APPLICABLE

3.2.4 - Risk of uncontrolled movement and overturning

When in the platform, respect the following instructions :
• Before operating the machine on any indoor or outdoor surface (premises, bridge,
truck, etc.), check that the surface is capable of supporting the combined machine
weight and platform capacity. Check the maximum value in the technical characteristics
( Section G 1-Main characteristics).
• Remain vigilant of driving direction reversal at the platform. Check the driving direction with the help
of the red or green arrow on the chassis relative to the red and green arrows on the platform control
box.
• Always ensure that the chassis is never driven any closer than 1 m(3 ft3 in) m to holes, bumps, tilts,
obstructions, debris and ground coverings that may hide holes and other dangers.
• During motion direction reversal from the platform or ground control box, the joysticks or switches
must be stopped in neutral position before reversing the direction of motion.
• Taking note of the overall load dimensions and weight, place the loads in the centre of the platform or
distribute them it a uniform manner.
• Do not drive the machine on slopes or tilts beyond the design limits. Check the maximum value in the
technical characteristics(
• While driving, always place the arrow above the rear axle, in the direction of movement.
• While driving on a slope, always orient the machine in the direction of the slope.
• If the tilt alarm sounds when the platform is raised, lower platform completely, then reposition machine
onto level ground before raising platform.
16 2420332370
Minimum safety distance
Mètre
Avoid contact
3
5
6
8
11
14
,
EXCEPT WHEN THE LOCAL REGULATIONS ARE MORE STRICT
Section G 1-Main characteristics).
E06.11
Feet
10
15
20
25
35
45
.
EN