Overturning / Tip-Over Hazards - Haulotte STAR 10 Operator's Manual

STAR 10 - STAR 26J
A
- Foreword

2.1.3 - Overturning / Tip-over Hazards

Before positioning and operating the machine :
• Ensure that the surface is capable of supporting the machine weight including the rated
capacity.
• Do not exceed the maximum rated capacity that includes the
weight of both material and allowed number of occupants. Do not
exceed the allowable number of occupants.
• Do not increase the working height (using extensions, ladder,
etc.).
• Do not place ladders or scaffolds in the platform or against any
part of this machine.
• Position loads uniformly in the centre of the work platform.
• Do not use the machine at wind speeds that are above the
permissible threshold. Refer to the display on the work platform to
view the permissible wind speed.
• Do not increase the surface area of the platform exposed to wind.
This includes adding panels, mesh, banners. Failure to follow this
instruction may lead to a loss of stability and as a result, the
machine could tip over.
• Do not raise the platform or move the machine with the platform
raised on a slope with a gradient greater than the machine's
permissible limit.
• Do not drive the machine on slopes or grades exceeding the
specified limits.
• Do not pull or push towards any object outside of the platform. Do not exceed the maximum
allowable side force stated in the performance specifications.
• Do not use the machine to support any external structure.
• Do not use the machine to tow other machines or to drag materials.
12 4001178810 E 10.22 USA / GB