Advance - ATCOM AT800 Series User Manual

All manuals and user guides at all-guides.com
AT800 AT800 AT800 Series AT800 Series Series User Series User User User Manual

Advance

Advance Advance Advance
1. 1. 1. 1. Web Web Server Server
Web Server Web Server
a) Enable Web Enable Enable Enable
submit, if disable web server, the web interface will not be available anymore.
If web server is disabled on AT800/AT800P, it needs restore to factory settings by long
press * and # key when powering on. Please refer to
settings.
b) Admin Admin Admin password Admin
Tips: input
c) U U U U ser ser ser ser password password password: set user password here password
Tips: input
d) HTTP HTTP Port HTTP HTTP Port—the web server port, default is 80. If user has changed the http port, e.g. Port Port
8080; to log in web interface by URI:
2. 2. 2. 2. VLAN VLAN VLAN VLAN
Use Use VLAN VLAN
a) Use Use VLAN VLAN tagging:
b) Voice VLAN Voice Voice Voice VLAN VLAN VLAN Identifier
Voice Voice VLAN VLAN
c) Voice Voice VLAN VLAN Priority
d) Data Data VLAN Data Data VLAN VLAN VLAN Identifier
Data Data VLAN VLAN
e) Data VLAN Data VLAN priority
TIPS: The RTP/RTCP packet is voice packet, the others is data packet.
Notes: VLAN can only works in bridge mode. If you enable VLAN in router mode, it
will not work with VLAN.
3. 3. 3. 3. Port Port Port Port Link Link Link Link
a) LAN port link—LAN port duplex mode
b) PC port link—PC port duplex mode
4. 4. 4. 4. Qos Qos
Qos Qos
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
Web Web Server: Web Server: Server: yes/no Server: yes/no yes/no yes/no, enable/disable web server; system will reboot after
password password password: set admin password here
http://ip-address/index
http://ip-address in the browser to enter user web interface.
tagging: tagging: yes/no yes/no
tagging: yes/no yes/no, enable/disable VLAN tagging, default to no.
Identifier Identifier—set voice VLAN identifier, range from 1 to 4096 Identifier
Priority Priority
Priority—set voice VLAN priority, range from 0 to 7
Identifier Identifier Identifier—set data VLAN identifier, range from 1 to 4096
priority priority
priority—set data VLAN priority, range from 0 to 7
How to restore to factory
in the browser to enter admin web interface.
http://ip-address:port in the browser.
www.atcom.cn