Call Feature Setting; Dial Plan - ATCOM AT800 Series User Manual

All manuals and user guides at all-guides.com
AT800 AT800 AT800 Series AT800 Series Series Series User User Manual User User
the far end does not support this codec.) Select no, the phone will contains all the codec
G.711A/u, G.722, G.723, G.726-16, G.726-24, G.726-32, G.726-40, G.729, iLBC, Lin-16 in SDP.
Defaults to no.
3. DTMF Tx Tx Tx Tx Method DTMF DTMF DTMF Method Method Method---select the method to transmit DTMF signals to the far end: Inband, rfc2833,
INFO. Defaults to RFC2833.
Call Call feature feature setting setting
Call Call feature feature setting setting
1. 1. 1. 1. Message Message Message waiting--- Message waiting--- waiting--- waiting---Choose yes to enable Message waiting indicator.
2. 2. 2. 2. Voicemail Voicemail Number--- Number---
Voicemail Number--- Voicemail Number---Set voicemail number.
3. 3. 3. 3. UDP Keep UDP UDP UDP Keep Keep alive Keep alive enable--- alive alive enable--- enable--- enable---Choose yes to send UDP message to sip server port, so as to ensure
the server port is still available.
4. 4. 4. 4. UDP keep alive intvl---
UDP UDP UDP keep keep alive keep alive alive intvl--- intvl---Set expire time of the keep alive UDP. intvl---
5. Default Default Default Default Ring--- Ring---Set default ring tone for incoming calls. Ring--- Ring---
6. 6. 6. 6. SRTP---
SRTP--- SRTP--- SRTP---Enable SRTP(Secure Real-time Transport Protocol), and it should work with sip server.
Dial Dial Plan Plan
Dial

Dial Plan

Plan
Dial plans specifies how to interpret digit sequences dialed by the user, and how to convert those
sequences into an outbound dial string. The syntax for dial plan closely resembles the corresponding
syntax specified by MGCP and MEGACO.
The dial plan functionality is regulated by the following configurable parameters:
� Interdigit_Long_Timer---refer to Interdigit_long_timer part for details
�
Interdigit_Short_Timer---refer to interdigit long timer part for details
� Dial_plan
Dial plan contains a series of digit sequences, separated by "|" character. The collection of
sequences are enclosed in parentheses, "(" and ")".
Defaults to (xxxxxxxxxxxx.)
When a user dials a series of digits, each sequence in the dial plan is tested as a possible match.
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
www.atcom.cn
The