Faq; How To Restore To Factory Settings; Upgrading In The Safe Mode; How To Make Direct Ip Calls - ATCOM AT800 Series User Manual

All manuals and user guides at all-guides.com
AT800 AT800 AT800 Series AT800 Series Series Series User User User User Manual

FAQ

FAQ FAQ FAQ
How How to to to to restore restore restore to to to to factory
How How restore
There are three ways to perform a factory reset:
a. Reset from the man-machine interface, follow these steps:
1) Press menu menu menu menu softkey
Factory Factory
2) Scroll to Factory Factory Reset
3) 3) 3) 3) Press OK OK OK OK
b. Reset through the web interface, refer to
c. Reset to factory defaults when power on the device, follow these steps:
1) Press and hold the * and # key
2) Plug in the DC adapter
3) After about 5 seconds, the device will boot up with the default factory settings.
Upgrading Upgrading Upgrading in in in in the Upgrading the the the safe
Upgrade firmware in the safe mode whenever the phone is not able to boot up normally.
a) Setting up a TFTP server, and set the IP address of PC to 192.168.1.200
b) Copy the firmware to the TFTP server home directory, and rename it to AT800x.FW
c) Make sure the phone and the TFTP server connect to the same switch
d) Long press # key and plug in the adapter until it displays "Upgrading..." on LCD.
e) The phone will start downloading the AT800.FW firmware from TFTP server
f) After downloading finished, phone will upgrade automatically
g) Wait till the phone finish upgrading, and it will reboot automatically
How How to to to to make make direct IP IP IP IP calls direct
How How make make direct direct
Press headset key to hear dial tone, and then press the third softkey "number" twice to
switch to "IP". Using * key to inputting ".". If user wants to dial 192.168.1.100, then press
192*168*1*100. After inputting the IP address, press dial key to dial it out.
How How How to to to to connect connect connect
How connect headset
Headset is standard RJ9 jack in following PIN sequence(from left to right):
Mic-
Spk-
Spk+
Mic+
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
factory settings
factory factory settings settings settings
Reset Reset select select
Reset and press select select
Reset and Reboot
safe safe mode safe mode mode mode
calls
calls calls
headset headset
headset
part for more details
www.atcom.cn