Phone Setting; Preference; Audio Device; Lcd - ATCOM AT800 Series User Manual

All manuals and user guides at all-guides.com
AT800 AT800 AT800 AT800 Series Series Series Series User User User User Manual
Interdigit Timer Master Override:
The long and short interdigit timers can be changed in the dial plan (affecting a specific line) by preceding
the entire plan with the following syntax:
Long interdigit timer: 'L' ':' delay-value ','
Short interdigit timer: 'S' ':' delay-value ','
Thus, "L=8, (. . .)" would set the interdigit long timeout to 8 seconds for the line associated with this dial
plan. And, "L: 8, S: 4, (. . .)" would override both the long and the short timeout values.
After finishing, click submit to save changes. The phone will restart automatically.
Phone Phone setting setting
Phone

Phone setting

setting
P P P P reference reference
reference reference
Audio Audio Device Device
Audio

Audio Device

Device
� Enable Enable Speaker Speaker
Enable Enable Speaker Speaker---Choose yes to allow the ring tone being played in speaker when there is an
incoming call. Choose no to play ring tone is headset.
� Headset Headset Volume Volume
Headset Headset Volume Volume----Set headset receiver volume in a conversation. Default is level 5.
� Headset Headset Headset Headset Input Input Input Input Gain Gain Gain---Set headset mic gain volume in a conversation. Default is 12. Gain
� Enable Enable Ring Ring Tone Tone
Enable Enable Ring Ring Tone Tone---Choose yes to play default ring tone in ringing state. Choose no to disable ring
tone. Incoming call will not generate a ring tone then.

LCD

LCD LCD LCD
� LCD LCD LCD LCD contrast contrast contrast---Adjust LCD contrast ranging from 1 to 8. Default is level 5. contrast
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
www.atcom.cn