Rtp Parameters; Sdp Payload Types - ATCOM AT800 Series User Manual

All manuals and user guides at all-guides.com
AT800 AT800 AT800 AT800 Series Series Series User Series User User User Manual
the previous registration. Defaults to 8 seconds.
Sub Sub Retry Retry Intvl Intvl
5. Sub Sub Retry Retry Intvl Intvl---The retry interval when the last SUBSCRIBE request fails. Defaults to 10
seconds.
RTP RTP Parameters Parameters
RTP

RTP Parameters

Parameters
1. RTP RTP RTP Port RTP Port Port---Minimum port number for RTP transmission and reception. <RTP Port Min> Port
and <RTP Port Max> should define a range that contains at least 2 even number ports .
Defaults to 16384
RTP RTP Port Port Max Max
2. RTP RTP Port Port Max Max---Maximum port number for RTP transmission and reception. <RTP port
Min> and <RTP Port Max> should define a range that contains at least 2 even number
ports. Defaults to 16482.
3. RTP RTP Packet RTP RTP Packet Packet Packet Size Size Size Size (ms)
Warning Warning: : : : Lin16-16 codec only supports RTP packet size = 10 ms because of the voice chip
Warning Warning
limitation. G.723 only allows 30ms/60ms RTP packet size.
SDP Payload Types
SDP SDP Payload SDP Payload Types Payload Types Types
1. AVT Dynamic AVT AVT AVT Dynamic Dynamic Dynamic Payload
G729b G729b Dynamic Dynamic
2. G729b G729b Dynamic Dynamic Payload
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
(ms)---Packet size in milliseconds, which can be 10, 20, 30, 40, 60 (ms) (ms)
Payload Payload---AVT dynamic payload type. Defaults to 101 Payload
Payload Payload
Payload---G729b dynamic payload type. Defaults to 18
www.atcom.cn