Table of Contents
Advertisement
Installation instructions
4. Start the machine:
•
•
5. Run a number of washes complete with dishware and check:
•
•
•
•
•
•
•
6. Final check: Empty the machine, turn the machine off using the ON/OFF
button and then turn off the power at the main switch:
•
•
•
7. Train and inform personnel concerning:
•
•
•
3.8 Documentation
For correct use and servicing, it is essential that the documentation accompany-
ing the machine is made available to personnel who will be using the machine.
The installation and user manual, which describes handling and care among oth-
er things, should be stored near the machine.
WD-215T & WD-275T
touch
Check the direction of rotation of the pumps
NB! If the direction of rotation is wrong, the phase must be inverted on the
incoming feed
Check that the overload switch on the feed cradle is functioning
There are no water leaks
The door switch works
Steam discharge from the machine
The tank and final rinse temperatures are maintained
The final rinse flow has been set correctly (2.5 l/min. (factory setting))
The washed items are clean
The washed items are dried
Re-tighten all the connections on the circuit breakers and contactors
Check that all the mini-switches and the motor cut-off switch are in the on
position.
Display the quick guide supplied with the machine
Washing
Care (daily, weekly and other frequencies)
Recommendation for annual service
29
Rev. 00 (202310)
Advertisement
Table of Contents
