Co-Linear Conversion; Co-Linear Vent Installations - Valor PORTRAIT 530IN Installation Manual

Venting

Co-Linear Vent Installations

Co-Linear Vent Installations into Existing
Solid-Fuel Burning Fireplaces and Chimneys
See venting accessories list on pages 38-39 for
allowable components.
Co-linear adapter may be installed as top or rear facing
outlet—see page 23.
• Co-linear and co-axial venting may be combined in a
single venting system provided converstion is done
only once using approved components and maintain-
ing proper clearances;
• Three-inch liners may only be installed into solid-fuel
burning fi replaces and chimney systems (no combus-
tible construction);
• The appliance must not be connected to a chimney
fl ue serving a separate solid-fuel burning appliance;
• Restrictors not required for
co-linear sidewall venting
with less than 5'-0" vertical
rise. For restrictor settings
beyond 5'-0" refer to chart
on page 17.
720SWK
Terminal
Min. 3'-0"
*Max. 5'-0"
May be used with
top or rear outlet
(requires 556CLA
Co-Linear Adapter)
* May be extended beyond 5'-0". Refer to 720SWK
installation instructions.
Sidewall co-linear installation into existing F/P using
720SWK—for units with logs, rocks, driftwood ONLY.
18
556CLA Co-Linear Adapter
3" min.
Bend
Radius
3" Liners

Co-Linear Conversion

2 x 3" liners
3/4"
556CLA
25-1/4"
9 to 11-1/2" depending
of front used - see front manual
556CLA Rear Mounted
3" min. 2 x 3"
bend radius liners
Co-linear
adapter
18" max.
horizontal run
530
engine
24-1/2"
Vertical co-linear installation into existing F/P
556CLA
2 x 3"
liners
3/4"
25-1/4"
9 to 11-1/2" depending
of front used - see front manual
556CLA Top Mounted
Approved co-linear
termination or approved
co-linear adapter
and approved
co-axial
Flashing
termination
Co-linear
adapter
40'
max
8'
min
2 x 3"
liners