Coal Set 530Csk - Valor PORTRAIT 530IN Installation Manual

Direct vent zero clearance gas fireplace
Hide thumbs Also See for PORTRAIT 530IN:
Table of Contents

Advertisement

Installation

Coal Set 530CSK

1. Place the base coal on the supports in the fi rebox
and against the fi rebox back.
2. Place the left front coal in position behind the metal
lip at the front of the fi rebox. The side projection
on this coal should be near the middle front of the
fi rebox.
3. Place the right front coal behind the metal lip at the
front of the fi rebox. Its left side should rest over the
projection on the left front coal.
1
4
Back Brick
Burner
BASE
COAL
Firebox
supports
Burner
bracket
Rest the base coal
behind the burner
SIDE VIEW
1a
5
4. The center right coal has letter "R" embossed under-
neath. Place this coal behind the front
right coal.
5. The center left coal has letter "L" embossed under-
neath. Place this coal behind the front
left coal.
2
3
Fuel Beds
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Portrait 530ip

Table of Contents