Specifi Cations - Valor PORTRAIT 530IN Installation Manual

Direct vent zero clearance gas fireplace
Hide thumbs Also See for PORTRAIT 530IN:
Table of Contents

Advertisement

Specifications
Approval & Codes
This appliance is certified to ANSI Z21.88/CSA 2.33
American National Standard / CSA Standard for Vented
Gas Fireplace Heaters for use in Canada and USA, and
to CGA 2.17-M91 High Altitude Standard in Canada.
This appliance is for direct vent installations.
This appliance complies with CSA P.4.1-15 Testing
method for measuring annual fireplace efficiencies.
The installation must conform to local codes or, in the
absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54 or the Natural Gas and
Propane Installation Code CAN/CGA-B149.1. Only
qualified licensed or trained personnel should install
this appliance.
This appliance must be electrically grounded in
accordance with local codes, or, in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70
or the Canadian Electrical Code, CSA C22.1.
Ratings
Model
Gas
Altitude (Ft.)*
Input Maximum (Btu/h)
Input Minimum (Btu/h)
Manifold Pressure (in w.c.)
Minimum Supply Pressure (in w.c.)
Maximum Supply Pressure (in w.c.)
Main Burner Injector Marking
Pilot Injector Marking
Min. Rate By-Pass Screw
*High Altitude Installations
Input ratings are shown in BTU per hour and are
certified without deration for elevations up to 4,500
feet (1,370 m) above sea level.
For elevations above 4,500 feet (1,370 m) in USA,
installations must be in accordance with the current
ANSI Z223.1 and/or local codes having jurisdiction.
Heating value of gas in some areas is reduced to
compensate for elevation—consult your local gas
utility to confirm.
For installations at elevations above 4,500 feet
(1,370 m) in Canada, please consult provincial and/or
local authorities having jurisdiction.
6
530IN
530IP
Natural
Propane
0-4,500 feet*
20,500
19,000
6,500
12,500
3.5–3.9"
10.3–10.7"
5"
11"
10.5"
14"
580
200
35
27
125
125
Supply Gas
Heater engine 530IN is used with natural gas.
Heater engine 530IP is used with propane gas.
The supply pressure must be between the limits shown
in the Ratings table.
The supply connection is 3/8" NPT female located at the
left side of the control valve. The opening for the gas
supply line is at the rear left corner of the appliance.
Gas line access at
rear left corner
Gas supply
connection 3/8"
NPT female at
valve
Gas Conversion
The 530 fireplace is offered with natural gas or propane
gas. It can be converted from one gas to the other. See
installation manual supplied with the gas conversion kit
for more information.
Fuel Beds
The 530 engine can use a simulated logs, coals, rocks or
driftwood fuel bed with natural gas or propane.
Electrical
The 530 does not require an electrical power source
unless fitted with an optional circulating fan.
 WARNING
Optional electrical accessories ARE NOT
ALLOWED when adapting appliance for
outdoor use.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Portrait 530ip

Table of Contents