Install The 530Rsk-Rock Set And Liners - Valor PORTRAIT 530INI Installation & Owner's Manual

Install the 530RSK—Rock Set and Liners
Unpack each piece of the ceramic rock set carefully to
avoid damages. The set contains:
• Ceramic platform
• Left and right side reversible ceramic panels
• Rear panel support
• Rear fl uted panel
• Ceramic base for rocks
• 12 ceramic rocks
580RGL Refl ective Glass Liner Set. To install the
580RGL, see the installation instructions provided with
the kit.
Install liners
1. Remove the rear
panel support inside
the fi rebox (3 screws).
2. Replace with the
rear panel support
provided with the
530RSK kit and fi x it
(3 screws).
If installing the
567FGP Top Grille
(sold separately),
fi t it now. See
instructions supplied
with the grille.
3. Place the rear panel
on the rear support
as indicated. Hold in
place and go to next
step.
4. Place the left and then the right panels in the fi rebox
showing the black fl uted sides.
Installation
Install rock base & platform
1. Place the rock base behind the burner. The two
protrusions in front of the base should rest on the
burner mounts as indicated.
Burner
Rest the rock base
behind the burner
on its bracket flanges
2. Place the ceramic platform over the burner and
around the rock base with the pegs on the top. The
rear part of the platform should overlap the edges of
the rock base on each side.
QUALIFIED
INSTALLER
Back Panel
ROCK
BASE
Rock base
support
Burner
bracket
SIDE VIEW
Front edge of platform rests on
top of sheet metal lip
33